Silicone spray

Name: Silicone spray
Brand: Würth
SKU: 0893221

Silicon spray
SILSPR-500ML

Art.-no. 0893221

EAN 4053479304441

All versions

Similar products

Prices for customers after login

Silicone spray

Art.-no. 0893221

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: 1800 102 5061

Ensures long-lasting protection, preservation and insulation of vehicle exterior and interior plastic, rubber and metal parts; good lubricating properties

Plastic parts retain a high-gloss finish and do not become brittle

Rubber parts are protected, do not become brittle and do not freeze or stick

Impregnated folding roofs and hoods

Anti-static effect (dust-repellent)

Protects electrical contacts against moisture

Sliding roof and seat rails, seat belt rollers etc. run smoothly

Prevents squeaks and creaks between dissimilar materials, e.g. metal/plastic etc.

Serves as an installation aid, e.g. for hose connections

No staining

Notice

Not suitable for lubricating metal/metal constructions.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For bumpers, protective strips, plastic rails and guides, door and sealing rubbers, rubber cuffs and hoses.

Contents	500 ml
Container	Spray can
Colour	Colourless
Chemical basis	Mineral oil
Density/conditions	0.61 g/cm³ / at 20°C
Min./max. temperature conditions	-5 to 40 °C
Shelf life from production	24 Month

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 3

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.