Shrink, planishing and finishing hammer short version with round, grid face
Plnshng/bmpng/finishing hmmr, short, rnd crss-mlld
PANBETHAM-BDYWRK-SPN-CROSSMILLED-SMALL
Register now and access more than 125,000 products
Datasheets(X)
Length of head | 105 mm |
Face diameter (hammer) (Ø) | 32 mm |
Peen length x peen width | 25 x 25 mm |
Hammer weight | 300 g |
Material | Hardened steel |
Material of handle | Hickory |
Length of handle | 320 mm |
Last viewed
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
1-inch impact socket wrench insert hexagon, metric, short
Valve setting blade
Vehicle finishing disc
Clamping plate II For MacPherson spring strut compressor
1/2 inch impact socket wrench insert hexagon, metric, short
Vehicle cable FLRY
Thread mandrel For PEG 312
Paint spray, special
Cylindrical pin, hardened DIN 6325, steel, plain