Bonded anchor glass capsule W-VPZ

Compound anchor glass cartridge W-VPZ
ANC-(W-VPZ)-20X145

Art.-no. 5915520145

EAN 4068362225239

Individual price display after login

Art.-no. 5915520145

Individual price display after login

Quantity

x 10 pcs

Exclusively for trade customers

Login/Register
Call customer service: 1800 102 5061

Pre-assembled mortar cartridge for compound anchor W-VPZ (cracked and uncracked concrete). Can be used even in extremely low and high temperatures

2C glass capsule with vinyl ester resin (styrene-free) and hardener

Can be used all year round, even in frost and heat (temperature in concrete: -20 °C to +40 °C)

Quick and economical installation due to the pre-portioned mortar quantities

Rapid curing means hardly any waiting time until load capacity

Drill hole cleaning does not require compressed air

Allows interruption to work after inserting the mortar capsule into the drill hole, as the chemical reaction only begins after the anchor rod has been inserted

Hardened composite mortar seals the drill hole against water

If a drill hole is created with a dust extraction drill bit, subsequent drilling hole cleaning can be omitted (dust load is minimised)

No plastic waste

Minimum shelf life 36 months

Proof of Performance

European Technical Assessment ETA-21/0168: Fixing point + cracked and non-cracked concrete (anchor rod W-VD-A)

Leak test under the influence of water pressure up to 7 bar

Fire resistance: N_Rk,fi(30), N_Rk,fi(60), N_Rk,fi(90), N_Rk,fi(120)

Create the drill hole

Make the drill hole with the Würth hollow drill bit. Hole cleaning can be dispensed with

Clean the drill hole: 2x blow-out/2x brush-out/2x blow-out

Place the capsule in the bore hole

Set anchor rod W-VD-A turning/with impact

Observe the curing time. Do not move or load the anchor rod until it is completely cured

Remove extruded mortar

Install attachment and apply torque T_inst

Minimum curing times
Concrete temperature Minimum curing time	Minimum curing time
-20°C to -16°C	17 hours
-15°C to -11°C	7 hours
-10°C to -6°C	4 hours
-5°C to -1°C	3 hours
0°C to +4°C	50 min
+5°C to +9°C	25 min
+10°C to +19°C	15 min
+20°C to +29°C	6 min
+30°C to +40°C	6 min
Cartridge temperature	-15°C to +40°C

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Anchoring with European Technical Assessment in cracked and uncracked concrete

The anchor may be used for anchorages with static loads (e.g. tare weight, fittings, stored materials) or quasi-static activity

Suitable for fastening metal structures, metal profiles, brackets, base plates, supports, wooden structures, railings, stairs etc.

Instructions

The anchor rod is set in a rotating stroke, the two mortar components are mixed by the rotation movement

Blow out the drill hole completely at least twice from the bottom of the drill hole using a blow-out pump or compressed air

Brush out the drill hole twice with the WIT-RMB cleaning brush

Blow out the drill hole completely at least twice from the bottom of the drill hole using a blow-out pump or compressed air

The drill hole can be produced with a suction drill, which means that additional drilling hole cleaning can be omitted

Effective anchoring depth (h ef)	170 mm
Suitable for anchor rod	M20, M12 IT
Nominal drill-bit diameter (d 0)	22 mm
Drill hole depth (h 0)	170 mm
Suitable cleaning-brush diameter	22 mm
Approval	ETA-21/0168
Min./max. processing temperature	-15 to +40 °C
Torque during anchoring (T inst)	150 Nm
Shelf life from production/conditions	36 Month / cool and dry storage area, 5°C to 25°C
Minimum component thickness (h min)	220 mm
Min. centre-to-centre distance (s min)	90 mm
Centre-to-centre distance (s cr, N)	510 mm
Min. edge clearance (c min)	55 mm
Edge clearance (c cr, N)	255 mm

Cracked and uncracked concrete: Performance data, individual anchor without the influence of the edge distance (c ≥ 10 h_ef)
Temperature range: 24°C¹⁾/40°C²⁾ (temperature ranges 50°C/80°C, see ETA-21/0168) Base material: Dry and wet concrete Concrete compressive strength: C20/25 Drill hole cleaning: 2x blow out/2x brush out/2x blow out or dust extraction drill bit
Anchor diameter			M8	M10	M12	M16	M20
Effective anchorage depth		h_ef[mm]	80	90	110	125	170
Cracked concrete
Admissible centric tension load³⁾, (individual anchor without the influence of the edge distance and without dense reinforcement)	Zinc-plated steel, 5.8	N_adm[kN]	4,0	7,3	11,5	18,7	31,7
	Zinc-plated steel, 8.8	N_adm[kN]	4,0	7,3	11,5	18,7	31,7
	A4 and HCR stainless steel	N_adm[kN]	4,0	7,3	11,5	18,7	31,7
Admissible shear load³ (individual anchor without the influence of the edge distance and without dense reinforcement)	Zinc-plated steel, 5.8	V_adm[kN]	6,3	9,7	14,3	26,9	41,7
	Zinc-plated steel, 8.8	N_adm[kN]	8,6	13,1	19,4	35,9	56,0
	A4 and HCR stainless steel	V_adm[kN]	6,0	9,2	13,7	25,2	39,4
Uncracked concrete
Admissible centric tension load³⁾, (individual anchor without the influence of the edge distance and without dense reinforcement)	Zinc-plated steel, 5.8	N_adm[kN]	8,0	13,8	20,0	28,0	44,4
	Zinc-plated steel, 8.8	N_adm[kN]	8,0	14,6	21,4	28,0	44,4
	A4 and HCR stainless steel	N_adm[kN]	8,0	14,6	21,4	28,0	44,4
Admissible shear load³ (individual anchor without the influence of the edge distance and without dense reinforcement)	Zinc-plated steel, 5.8	V_adm[kN]	6,3	9,7	14,3	26,9	41,7
	Zinc-plated steel, 8.8	N_adm[kN]	8,6	13,1	19,4	35,9	56,0
	A4 and HCR stainless steel	V_adm[kN]	6,0	9,2	13,7	25,2	39,4
¹⁾ Maximum long-term temperature ²⁾ Maximum short-term temperature ³⁾ The partial safety factors of the resistances regulated in the approval and a partial safety factor of the actions of γF = 1.4 have been taken into account. The tensile load portion "continuous load" (including constant loads and constant portions of variable loads) is less than 60% of the total tensile load. For information on combining tensile and shear loads, on the influence of the edge distance, and on anchor groups, please see standard EN 1992-4.

Assembly data
Nominal drill ∅	d⁰ [mm]	10	12	14	18	22
Drill hole depth/effective anchorage depth	h₀/h_ef[mm]	80	90	110	125	170
Minimum edge distance¹⁾	c_min [mm]	40	45	45	50	55
Minimum axis distance²⁾	s_min [mm]	40	50	60	75	90
Minimum member thickness	h_min [mm]	110	120	140	160	220
Through hole in the component being connected	d_f ≤ [mm]	9	12	14	18	22
Torque while installing anchor	T_inst≤ [Nm]	10	20	40	80	150
Nut width across flats	AF [mm]	13	17	19	24	30
Anchor rod width across flats	AF [mm]	5	6	8	12	14
¹⁾If the characteristic edge distance is not met, the maximum load capacity is reduced. The smallest possible edge distance is c_min ²⁾If the characteristic axis distance is not met, the maximum load capacity is reduced. The smallest possible axis distance is s_min

Suitable glove:

Product

Description

Household glove

Description:

Permeation level: 2

Liquid-proof, premium-quality cleaning glove made from natural latex

Vinyl chemical and moisture protective glove

Description:

Permeation level: 6

Fully dipped protective glove with vinyl coating on cotton jersey lining

Nitrile chemical protective glove with cotton velour finish inside

Description:

Permeation level: 6

Chemical protective glove chloroprene

Description:

Permeation level: 6

Heavy-duty design

Disposable nitrile glove

Description:

Permeation level: 3

Liquid-proof, food-safe disposable glove

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.