Wheel brush Braided steel with hole
Round brush steel
RDBRSH-AG-KNOTTED-ST-D115X14X22,23MM
Register now and access more than 125,000 products
- No premature opening of the bundles when the brush is positioned at an angle
- Aggressive brushing effect with high wear resistance thanks to anti-clockwise braiding on the wheel brush
- For use on angle grinders
- Only the edge tips act on the workpiece. While excessive contact pressure does not improve the result, it does increase the required drive power and reduces the service life of the brush.
- Always wear safety goggles and safety gloves when working with machine brushes!
Datasheets(X)
- Removes scale, rust, varnish, slag and rubber residues
- Cleans concrete residue from formwork
 | |
Diameter (D) | 115 mm |
Effective width (A) | 14 mm |
Usable length of wire (H) | 24 mm |
Drill hole (d) | 22.23 mm |
Wire diameter | 0.50 mm |
Material of wire | Steel |
Design | Hardened, braided anti-clockwise |
Max. rotation speed | 12500 rpm |
Aggressiveness | Middle |
Suitable for angle grinder (point system) | 4 of 4 points |
EN standard | 1083-2 |
Last viewed
1/4 inch socket wrenches Assortment of 27 pieces
Diesel Engine Oil 15W-40 API CH4
Hammer drill bit Max Quadro-L
Oil filter wrench, spare belt
Hexagon socket set screw with flattened tip ISO 4027, A2 stainless steel, 21H, plain
Natural stone sealant
Hand tap, taper tap HSS DIN 2181
Industry Clean cleaner
Contact spray Oxidation solvent
Flat chisel In line with DIN 6453