Separator
Separator tool
SEPRTL-SPNW155MM
Register now and access more than 125,000 products
- This separator is used if puller hooks cannot reliably grip the part being extracted as it is seated too closely. The separating blades are mounted between the parts and pressed against each other. The wedge shape of the separating blade separates the assembly.
- The separator can also be used to remove thin parts, as the pull-off force acts on a large area. Prevents undesirable deformations and damage. The separating blades are mounted with the flat surface under the part to be removed.
- Drop-forged and hardened separating blades
- High-strength clamping screws
Datasheets(X)
 | |
Min./max. internal clamping width (A) | 30-155 mm |
Width of clamping jaw (B) | 215 mm |
Spindle length (C) | 310 mm |
Min./max. hole distance (E) | 137-262 mm |
Material of separating blade | Vanadium steel |
Surface of the separating blade | Zinc plated |
Thread dimension | M18 x 1.5 |
Last viewed
Thin-walled heat-shrink hose Shrink rate 3:1, with internal adhesive
Double-end box wrench, deep depressed centre 8 pieces
1/4 inch socket wrenches Assortment of 33 pieces
3/4-inch impact socket wrench insert hexagon, metric, long
Plug-in fuse OTO-AS OEM quality
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
Drive-in anchor WSL-ED
Sandpaper, waterproof
Tool assortment 38 pieces
Spring lock washer, shape B DIN 137, spring steel, mechanically applied zinc coating, shape B, corrugated