Lock washer VS Spring steel, mechanically applied zinc coating
WSH-LOK-VS-(MZN)-24,0X17,0X1,90
Art.-no. 04939016
EAN 4058794209228
Register now and access more than 125,000 products
The Belleville washer form features angled teeth to create an optimum and simultaneous friction-fit and form-fit connection.
It makes sense in many cases – primarily when using short screws and loads which are vertical to the screw axis – to prevent the connection loosening by using lock washers to supplement the pre-tensioning force. For difficult conditions, such as harder surfaces, slotted holes, screws of strength class 10.9 etc., the strengthened VS design is recommended.
Datasheets(X)
 | |
Suitable for screw thread | M16 |
Suitable for thread (imperial) | 5/8 inch |
Internal diameter (d1) | 17 mm |
Outer diameter (d2) | 24 mm |
Height (h1) | 2.6 mm |
Thickness (s1) | 1.9 mm |
Material | Spring steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Form | VS |
Last viewed
Hexagon bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, plain
High-temperature lubricant paste HSP 1400
Protective cotton Knitted Glove
3/8 inch socket wrench assortment
Bond and Seal Fast structural adhesive
1/2-inch impact socket wrench insert hexagon, metric, short
SPEED cutting disc for stainless steel
Spray head VARIOCAP For REFILLOmat
Hexagon Socket Head Cap Screw ISO 4762, zinc plated 8.8 steel with thick-layer passivation VZD