LMS-Fluid foodstuffs lubricant - LUB-FDGRD-(LMS FLUID)-400ML

LMS-Fluid foodstuffs lubricant - LUB-FDGRD-(LMS FLUID)-400ML - 1

LMS-Fluid foodstuffs lubricant

Name: LMS-Fluid foodstuffs lubricant
Brand: Würth
SKU: 0893107001

Foodstuffs lubricant LMS-Fluid
LUB-FDGRD-(LMS FLUID)-400ML

Art.-no. 0893107001

EAN 4046777083989

All versions

Prices for customers after login

LMS-Fluid foodstuffs lubricant

Art.-no. 0893107001

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: 1800 102 5061

Physiologically safe, paraffin oil-based special lubricant

Viscous, colourless special lubricant

Reduces wear and friction

Excellent protection against corrosion

Precise application

Optimum, precise lubrication at defined lubricating points

Economical and efficient to use

Tasteless and odourless

AOX and silicone-free

NoticeCan be used in areas in which food is processed or stored. NSF H1¹
The product may come into contact with foodstuffs for technical reasons.

¹ NSF = internationally recognised organisation for the supervision and registration of products used in the food industry.

NSF H1 registered (no.: 135923), meets the requirements of H1, 1998.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, this service is provided under the exclusion of any liability, unless the advice or information given falls within the scope of our specified, contractually agreed scope of services or the consultant was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and carry out further development.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application areaPhysiologically safe, paraffin oil-based special lubricant for use in the food, beverage and pharmaceutical industries.

InstructionsClean the lubricating point and then apply where required. If used in areas in which food is processed or stored, only the minimum quantity technically necessary may be used.

Chemical basis	Medical white according to DAB 10
Lubricant system	Oil
Colour	Colourless
Smell/fragrance	Neutral
Density	0.86 g/cm³
Density conditions	at 20°C
Min. temperature conditions	-20 °C
Max. temperature conditions	145 °C
Min. flashing point	245 °C
Kinematic oil basis viscosity	70 mm²/s
Conditions for viscosity of oil basis	at 40°C
Silicone-free	Yes
Acid-free	Yes
Resin-free	Yes
AOX-free	Yes
Resistance against	Water Salt water Acid Lye
Contents	400 ml
Weight of content	344 g
Container	Can
Shelf life from production	12 Month

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.