Hole saw HW

Name: Hole saw HW
Brand: Würth
SKU: 063013070

Hole saw HW flat cut
SAW-HO-TC-FLCUT-D70MM
ZEBRA

Art.-no. 063013070

EAN 4024835699464

All versions

Prices for customers after login

Hole saw HW

Art.-no. 063013070

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: 1800 102 5061

Flat-cut hole saw (cutting depth limit) for a precise and clean drilling pattern with low tolerances

Uniform CNC grinding with specially matched, cutting pressure-reducing cutting shape

Precise, clean cut with low tolerances

Stepped, optimised centre drill (GS-protected system)

Eliminates the need for laborious centre punching, as the drill can be centred without drifting off course

Reduced drilling force and over 50% reduction in drilling time coupled with lower power consumption (depending on the hand-held drill used)

Precise, optimally embedded seating of the carbide teeth via a unique, fully automatic soldering process

High cutting performance and long service life

Cut depth limiter

Prevents work accidents and protects the tool and machine from damage

Ejection spring

Protects shock-sensitive carbide teeth after pre-drilling when the drill bit enters the medium

Ejects the drilled-out piece ("drill core") automatically once drilling is complete

Separate hardened shaft for ∅ 32 mm upwards

Compensation for the increasing torsion and torques associated with increasing ∅

Notice

The cylinder saw must be seated securely in the drill chuck

Avoid tilting of the cylinder saw

Appropriate protective clothing such as safety glasses, gloves etc. must be worn during work

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

For use with upright and hand-held drills in tool steels, construction steels, non-ferrous metals, non-rusting metals (e.g. A2 and A4), asbestos, fibreglass and plastics, PVC, zinc, plaster boards, light building boards and thin-walled wood and laminated panels, e.g. furniture rear panels.

Instructions

Max. cutting depth in steel = 4 mm, in stainless steel = 2 mm. Ensure that the saw is sufficiently cooled/well lubricated. Recommended speeds must be observed. Do not make oscillating movements with hand-guided drills, as this movement places uneven loads on the carbide teeth, which could cause them to break. For saws from 30 mm diameter, use an upright drill.