Welcome to Würth India For trade customers only
HSCo machine tap for through holes in nuts DIN 357 - MATAP-THRGHO-HSCO-DIN357-BLUE-M12 HSCo machine tap for through holes in nuts DIN 357 - MATAP-THRGHO-HSCO-DIN357-BLUE-M12
HSCo machine tap for through holes in nuts DIN 357 - MATAP-THRGHO-HSCO-DIN357-BLUE-M12 - 1
HSCo machine tap for through holes in nuts DIN 357 - MATAP-THRGHO-HSCO-DIN357-BLUE-M12 - 2

HSCo machine tap for through holes in nuts DIN 357

Machine screw tap HSCo blue DIN 357 form B
MATAP-THRGHO-HSCO-DIN357-BLUE-M12
ZEBRA

Art.-no. 06539412
EAN 4011231541787
All versions

Prices for customers after login
HSCo machine tap for through holes in nuts DIN 357

Art.-no. 06539412

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Long machine nut screw tap with overrun shaft for cutting nuts for metric threads in steel up to a strength of 800 N/mm².

Long service life


Very long threaded start (approx. 2/3 of the thread length) and up to 4x more teeth compared to conventional machine taps



Specially developed for machining nuts


The groove and thread geometry has been specially designed for machining nuts.



Product packaging made of 100 % PCR (recycled plastic from household waste), 100 % recyclable and Cradle to Cradle Certified® Bronze

Notice

Sufficient coolant and lubricant must be added when cutting threads.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Instructions

Before reversing the screw tap, the entire point of the tool must be removed from the drill hole. Failure to do so may cause cutting edges to chip or the tool to break.

Thread type

Metric thread

Material to be processed

Steel

Hole type

Clearance hole ≤ 1xD

Suitable for machine type

Milling/drill center, Pedestal drilling machine

Quality

ZEBRA-Premium

Thread type x nominal diameter

M12

Pitch

1.75 mm

Length

180 mm

Shank diameter

9.0 mm

Size of square

7.0 mm

DIN

357

Cutting material

HSCo

Surface

Plain

Form

0 - not applicable

Core hole diameter

10.2 mm

Shank style

Cylindrical with square drive

Tolerance of screw taps

ISO 2 (6H)

Suitable for tensile strength up to

800 N/mm²

Service life (points system)

3 of 4 points

Trueness to gauge (points system)

4 of 4 points

Versatility (points system)

1 of 4 points

Cutting behaviour (points system)

3 of 4 points

Chip formation (points system)

3 of 4 points

Material of sub-group

General structural steels, Non-alloyed tempering steels, Tool steels, High-speed steels, Copper, low-alloyed, Aluminium alloys, Aluminium, Aluminium casting alloys (<10% silicon), Aluminium wrought alloys

Key
vc = cutting speed [m/min]
f = feed [mm/r]
n = rotation speed [rpm]
The suggested cutting values are reference values and must be adapted to the respective conditions.
For M3-M5
Material designation Tensile strength M3 M4 M5
vc n f n f n f
from to from to from to from to
Steels
General structural steels < 800 N/mm² 6 8 637 849 0,50 477 637 0,70 382 509 0,80
Unalloyed quenched and tempered steels < 800 N/mm² 6 8 637 849 0,50 477 637 0,70 382 509 0,80
Low-alloy quenched and tempered steels < 800 N/mm² 6 8 637 849 0,50 477 637 0,70 382 509 0,80
Unalloyed quenched and tempered steels < 800 N/mm² 6 8 637 849 0,50 477 637 0,70 382 509 0,80
Low-alloy quenched and tempered steels < 800 N/mm² 6 8 637 849 0,50 477 637 0,70 382 509 0,80
Alloyed quenched and tempered steels < 800 N/mm² 4 6 424 637 0,50 318 477 0,70 255 382 0,80
Nitriding steels < 800 N/mm² 4 6 424 637 0,50 318 477 0,70 255 382 0,80
Tool steels < 800 N/mm² 4 6 424 637 0,50 318 477 0,70 255 382 0,80
High-speed steels < 800 N/mm² 4 6 424 637 0,50 318 477 0,70 255 382 0,80
For M12
Material designation Tensile strength M12
vc n f
from to from to
Steels
General structural steels < 800 N/mm² 6 8 159 212 1,75
Unalloyed quenched and tempered steels < 800 N/mm² 6 8 159 212 1,75
Low-alloy quenched and tempered steels < 800 N/mm² 6 8 159 212 1,75
Unalloyed quenched and tempered steels < 800 N/mm² 6 8 159 212 1,75
Low-alloy quenched and tempered steels < 800 N/mm² 6 8 159 212 1,75
Alloyed quenched and tempered steels < 800 N/mm² 4 6 106 159 1,75
Nitriding steels < 800 N/mm² 4 6 106 159 1,75
Tool steels < 800 N/mm² 4 6 106 159 1,75
High-speed steels < 800 N/mm² 4 6 106 159 1,75
For M6-M10
Material designation Tensile strength M6 M8 M10
vc n f n f n f
from to from to from to from to
Steels
General structural steels < 800 N/mm² 6 8 318 424 1,00 239 318 1,25 191 255 1,50
Unalloyed quenched and tempered steels < 800 N/mm² 6 8 318 424 1,00 239 318 1,25 191 255 1,50
Low-alloy quenched and tempered steels < 800 N/mm² 6 8 318 424 1,00 239 318 1,25 191 255 1,50
Unalloyed quenched and tempered steels < 800 N/mm² 6 8 318 424 1,00 239 318 1,25 191 255 1,50
Low-alloy quenched and tempered steels < 800 N/mm² 6 8 318 424 1,00 239 318 1,25 191 255 1,50
Alloyed quenched and tempered steels < 800 N/mm² 4 6 212 318 1,00 159 239 1,25 127 191 1,50
Nitriding steels < 800 N/mm² 4 6 212 318 1,00 159 239 1,25 127 191 1,50
Tool steels < 800 N/mm² 4 6 212 318 1,00 159 239 1,25 127 191 1,50
High-speed steels < 800 N/mm² 4 6 212 318 1,00 159 239 1,25 127 191 1,50

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details