Drilling/cutting oil CUT+COOL
Prices for customers after login
Register now and access more than 125,000 products
Cools even when sprayed
Penetrates the smallest tolerances
Excellent corrosion protection
Free from silicone, chlorine, resin and acids
Free from substances that wet paint.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Catalogue page as PDF 1
For drilling, thread cutting, thread moulding, lathing, sinking, rubbing and sawing. Ideally suited for stainless steel, but also for high-alloy steels, construction steels, aluminium, non-ferrous and precious metals. Can also be used as a preservative agent on semi-finished/finished parts and machine parts, and can be used as gun oil.
Shelf life from production
Min. flashing point
Kinematic oil basis viscosity
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!