Cleaning brush For concrete and REBAR with M8 connecting thread WIT-RB
Cleaning brush for WIT-UH 300
CLNBRSH-(RB12)-MA-DRLHO12MM-ST-THRM8
Register now and access more than 125,000 products
For cleaning drill holes in concrete
- WIT-UH 300, Option 1
- WIT-UH 300, REBAR
- WIT-PE 1000, Option 1
- WIT-PE 1000, REBAR
With M8 connecting thread
- WIT-UH 300, option 1: European Technical Assessment ETA-17/0127
- WIT-UH 300, REBAR: European Technical Assessment ETA-17/0036
- WIT-PE 1000, option 1: European Technical Assessment ETA-19/0542
- WIT-PE 1000, REBAR: European Technical Assessment ETA-19/0543
Nominal drill hole diameter | 12 mm |
Suitable for anchor rod | M10 |
Suitable for rod diameter | 8 |
Outer diameter | 13.5 mm |
Length | 150 mm |
Filling length | 80 mm |
Connection thread | M8 |
Material of wire | Steel |
Würth Catalogue (1)
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Contact spray
ASSY® 3.0 zinc-plated blue chipboard screw
Pneumatic jigsaw DST 380 standard
Twist drill bit HSS DIN 338 type RN 130°
Blance weight for car steel rims Steel knock-on
3/8-inch socket wrench For TX screws, short
Linch pin
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Screw-in fitting for pneumatic air
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)