Window construction screw, self-drilling, countersunk milling head FEBOS®
FEBOS steel zinc plated countersunk milling head H
SCR-DBIT-CS-CUTHD-H2-(A2K)-3,9X13
Register now and access more than 125,000 products
- Self-tapping screw thread
- Self-drilling window construction screw for use in plastic window construction
- For connecting plastic profiles to the metal reinforcement (up to 2.5 mm) and for fastening fittings to profiles with metal bracing (up to 2.5 mm).
Please also observe the information on the overview page.
Datasheets(X)
CAD data (available after login)
 | |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Nominal diameter (d1) | 3.9 mm |
Length (l1) | 13 mm |
Head diameter (dk) | 7.5 mm |
Head height (k1) | 3.05 mm |
Drill tip length (lp) | 3.5 mm |
Internal drive | H2 |
Head type | Countersunk milling head |
Drill tip diameter | 3.1 mm |
Shape of tip | Drilling tip |
Declaration of performance (EU-CPR) | No |
Thread type | Self-tapping screw thread |
Last viewed
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel 10.9, plain
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, zinc-plated, blue passivated (A2K)
Aluminium handle 1,495 mm
Hardener thinner
Cable tie KBL 1 made of polyamide with plastic tongue
Diesel Engine Oil 15W-40
Plumb bob
SIMPLEX soft-face hammer with rubber-cellulose acetate insert combination
Vehicle dry abrasive paper strip RED PERFECT®
1/2 inch socket wrench insert metric, hexagon, short