Wheel brush Crimped steel, with shank
Wheel brush with shank
WHLBRSH-SHNK-40X4X6MM
Register now and access more than 125,000 products
- Increased stability during brushing
- Crimped wire bristles support each other
- For use on die grinders and drills
- High speeds improve brush performance and service life
- Only the bristle tips act on the workpiece. Excessive contact pressure does not improve the result, but increases power consumption and reduces the service life of the brush
- Always wear safety goggles and protective gloves when working with machine brushes!
Datasheets(X)
- For removing rust, paint, contamination etc.
- Cleaning welded seams
- Light deburring work
 | |
Diameter x usable width x shaft diameter (DxAxS) | 40 x 4 x 6 mm |
Usable length of wire (H) | 9 mm |
Wire diameter | 0.20 mm |
Material of wire | Steel |
Surface | 0 - not applicable |
Design | Corrugated |
Suitable for cordless drills (points system) | 2 of 4 points |
Suitable for drill (points system) | 2 of 4 points |
Suitable for straight grinder (point system) | 4 of 4 points |
EN standard | 1083-2 |
Max. rotation speed | 18000 rpm |
Last viewed
Compressed-air filter / Regulator Semi-automatic
Multi-socket wrench 3/8 inch Assortment of 22 pieces
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, zinc-plated, blue passivated (A2K)
1/2 inch and 1/4 inch socket wrenches Assortment of 56 pieces
Metric combination wrench with POWERDRIV®
Small abrasives mini fibre disc
1/2" socket wrench insert metric, bi-hex, short
Tyre chalk
Standard manual cartridge gun
Pneumatic Impact Wrench DSS 1''