Exhaust assembly paste

Name: Exhaust assembly paste
Brand: Würth
SKU: 0890100045

Exhaust assembly paste
EXHSTREPCOMPD-ASSEMBLYPASTE-TUBE-140G

Art.-no. 0890100045

EAN 4053479223452

All versions

Similar products

Prices for customers after login

Exhaust assembly paste

Art.-no. 0890100045

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: 1800 102 5061

Soft compound for quick, easy and completely gas-tight assembly of sleeve (pipe plug) and flange connectors in exhaust systems.

No complicated welding required

Becomes as hard as metal due to the heat from the exhaust

Temperature resistant up to approx. 800°C

Seals off permanently

Resistant to impacts and vibration

Not susceptible to rust — hence easy to dismantle

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Ideally suited for installing or replacing exhaust components and for sealing connection points.

Instructions

Before use, remove loose rust and grease. Then apply the assembly paste to the plug connections, assemble the exhaust components and secure.

Weight of content	140 g
Colour	Grey
Smell/fragrance	Odourless
Chemical basis	Sodium silicate
Shelf life from production	12 Month
Max. temperature resistance	800 °C
Density	1.71 g/cm³
Density conditions	at 20°C

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Disposable nitrile glove, extra strong

Description:

Permeation level: 1

Hard-wearing disposable gloves with excellent chemical protection

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.