W-VD-IG internally threaded sleeve, zinc-plated steel for W-VD bonded anchor capsule systems and WIT injection systems in uncracked concrete
Female thread sleeve W-VD-IG/S steel zinc plated
ANC-(W-VD-IG/S)-(A2K)-M12
Register now and access more than 125,000 products
Anchorage via bond between mortar, female thread sleeve and anchoring base
Galvanised steel female thread sleeve in sizes (female thread) M8, M10, M12 and M16
Drill hole cleaning: 3x blow out
Assembly instructions: Insert female thread sleeve using hammer drill or impact drill in rotation + impact mode.
Datasheets(X)
W-VD-IG/S (galvanised steel) can be used in dry indoor areas
Type description | W-VD-IG/S |
Anchor internal diameter metric | IT M12 |
Female-thread length | 35 mm |
Anchor diameter (d) | 16 mm |
Effective anchoring depth (h ef) | 100 mm |
Anchor length (l) (l) | 100 mm |
Nominal drill-bit diameter cartridge system (d 0) | 18 mm |
Drill hole depth (h 0) | 100 mm |
Surface | Zinc plated |
Material | Steel |
Last viewed
Air cndtnng srvc. unit, vhcls., spr prt
Stone chip protection AQUA
Concealed full extension Dynamoov soft-close, 30 kg
Paint Spray
Heat-resistant crepe masking tape +120 °C
Screw with flattened half round head and hexagon socket ISO 7380-1 steel 010.9, zinc-plated blue passivated (A2K)
Metric combination wrench with POWERDRIV®
Allen key hexagon socket
Pneumatic impact screwdriver DSS 1/2 inch H
Twist drill bit HSS DIN 338 type RN 118°