W-FAZ PRO/S Zinc plated steel

• Highest loads at low spacing and edge distances: Large embedment depths enable a particularly high load capacity per anchor - even at reduced spacing and edge distances.


• Quick installation, minimum effort: Extra-low embedment depths reduce drilling and embedment time and reduce the risk of reinforcement hits.


• Economical and versatile: The freely selectable embedment depth enables optimum utilisation of the anchor - tailored to the application, load requirements and structural conditions.


• Ideal for fastening close to edges: Minimal spacing and edge distances allow compact anchor plates as well as secure fastenings close to the concrete edge and in thin concrete members.


• For applications subject to seismic activity: High performance under seismic activity - suitable for seismic performance categories C1 and C2.

European technical assessment ETA-20/0229 for single fixing point, option 1, cracked and uncracked concrete

• Static or quasi-static loads.


• Seismic activity, performance categories C1 and C2.


• Fire resistance R30, R60, R90, R120.

Approved base materials

• Cracked or uncracked concrete with a concrete compressive strength of C20/25 to C50/60 and C50/60 to C80/95.


• Compressed, reinforced and non-reinforced normal weight concrete without fibres.


• Steel fibre reinforced concrete (SFRC) with a concrete compressive strength of C20/25 to C50/60.

Load-bearing behaviour and fire exposure (standard time-temperature curve) - expert report no. GS 6.1/20-018-1

• Fire duration 180 minutes (M8-M16).

Swiss Federal Office for Civil Protection (Bundesamt für Bevölkerungsschutz, BABS) - Approval for shock testing BZS D 20-602

• Use in Swiss civil protection buildings (M8-M16, from standard anchorage depth hef,std).