Similar Products
Similar Products


Art.-no.: 0892072
Selected article: Other versions
Questions? 1800 102 5061
price/PU Prices for customers after login
x 1
Exclusively for trade customers Register now and access more than 125,000 products
Product information:
  • Catalogue page as PDF 1
  • Safety data sheet 1
  • Technical data sheet 1 | 2
Bitumen-based coating compound containing solvents, cannot be painted over
  • Long-term protection and anti-humming effect
  • Resistant to spray and salt water, weak acids and bases
  • Quick drying
  • Doesn't run on vertical or upright surfaces
  • Excellent adhesion

Turn the can upside down and spray until the valve is empty after use. Do not spray on joints, engines, gears and brake systems.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.


For repairing and protecting concealed areas that do not need to be painted. Ideal for preventing humming noises in external applications such as wheel housings, underbody seals, etc.


Shake can well before use

Surface must be dry and free from rust, dirt, and grease

Optimum spray distance at 30 cm

For thicker layers, allow the product to dry between coats

Working pressure 3-6 bar

Technical information

Chemical basis


Surface pre-treatment required

Dry, dust and grease-free


1000 ml

Weight of content

1090 g





Min. proportion of solids

66 %

Conditions for thorough drying

At 20°C, 400 μ wet

Min. spraying distance

20 cm

Conditions for skin-formation time

at 20°C

Min. skin-formation time

75 min

Drying time

2.5 h

Conditions for drying time

at 20°C


1.09 kg/m³

Ignition temperature

200 °C

Flashing point

2 °C

Density conditions

at 20°C

Shelf life from production

24 Month

Max. temperature resistance

80 °C

Min. temperature conditions

-25 °C

Min. temperature resistance

-25 °C

Max. spraying distance

30 cm

Recoatable/Can be painted over


Required accessory:
For applying stone chip and underseal products containing solvents.
Suitable glove:
Permeation level: 3
Cotton velour lining
Permeation level: 4
Long, heavy-duty design
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time Permeation level

< 10 min


≥ 10 min


≥ 30 min


≥ 60 min


≥ 120 min


≥ 240 min


≥ 480 min


Important information:
The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.
Last viewed
In order to guarantee the best service possible, we make use of cookies. By using our services you agree to the privacy policy. Close