Thread-rolling screw
DIN 7500-1 steel zinc plated flat head TX shape PE
SCR-PANHD-DIN7500-PE-TX45-(A2K)-M8X16
Register now and access more than 125,000 products
Self-tapping screws form a nut thread in cast blind holes, rim holes, drilled, lasered and punched sheet metal parts. Unlike thread cutting, thread-rolling does not interrupt the material structure in the receiving thread. Instead, the material is displaced and strain-hardened.
Eliminates thread cutting
Saves money
Non-cutting thread formation
Large thread flank overlap
High load-bearing capacity
Strain-hardened receiving thread (nut thread)
Greater load-bearing capacity
Play-free and self-locking thread seating
- Reduced likelihood of screw working loose
Protection against loss
The formed thread corresponds to a standard metric thread
 | |
Thread type x nominal diameter (d1) | M8 |
Length (l1) | 16 mm |
Head diameter (dk) | 16 mm |
Head height (k1) | 6 mm |
Head type | Pan head |
Material | Steel |
Surface | Zinc plated |
Thread type | Metric thread |
Internal drive | TX45 |
Standards | DIN 7500 |
RoHS-compliant | Yes |
Würth Catalogue (1)
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Digital tyre inflator
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Window construction screw, self-drilling, countersunk milling head FEBOS®
Silicone fluid silicone spray
1/2" socket wrench insert metric, bi-hex, short
Hexagon Socket Head Cap Screw with low Head DIN 7984, A2-070 stainless steel, plain
Magazine screwdriver Limited Edition - Reinhold Würth Signature
Thin-walled heat-shrink hose Shrink rate 3:1, with internal adhesive
1/2 inch socket wrench insert metric, hexagon, short
T-handle socket wrench For hexagon head screws