Textured acrylic

Name: Textured acrylic
Brand: Würth
SKU: 0892160500

ACRYSEAL-FLEX-STRUCTURE-WHITE-310ML

Art.-no. 0892160500

EAN 4046777135473

All versions

Individual price display after login

Textured acrylic

Art.-no. 0892160500

Individual price display after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: 1800 102 5061

Particularly suitable for repairing cracks and damage in structured or textured plaster, both indoors and outdoors

Adding high-quality quartz sand gives the product a fine-grained structure with even grain distribution

Can be painted over with emulsion paints

Resistant to UV and ageing

Odourless

Notice

Not suitable for use in building construction joints in accordance with DIN 18540

Sufficient ventilation should be ensured during the curing phase

A higher coating thickness extends the curing time

Due to the wide variety of paint and glazing formulations, preliminary testing is required in order to rule out any interactions

Take care with sealant joints that have been fully painted over. These tend to develop cracks when movement occurs in the joint, as the applied paint is generally less elastic than the sealant and then causes cracks to form in the paint

The setting speed is dependent on the application temperature, the weather and the substrate moisture. The setting speed is significantly delayed in cold, damp weather

The joint dimensions must be observed, wide joints in particular should be pre-filled with PE backer rod

Discolouration may occur in wood containing tannic acid

Tested in accordance with EN 15651 Part 1

Fire behaviour: Class E

Stability under load: ≤ 3 mm

Volume loss: ≤ 25%

Tensile behaviour after immersion in water at 23°C (ductile): ≥ 25%

Durability: Passed

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

For sealing cracks and damage to plaster, concrete and gypsum

For sealing structured and textured plaster, both indoors and outdoors

Instructions

The base material must be load-bearing, clean, dry and free from grease, rust and water

Adhesion can be improved on absorbent or porous surfaces by using an adhesion primer, e.g. silicone primer

Please refer to the processing instructions in our sealant guideline
For more information, please refer to the technical data sheet

Container	Cartridge
Contents	310 ml
Fungicidal properties	No
Colour	White
Chemical basis	Acrylate dispersion
Density	1.8 g/cm³
Continuous motion absorption	7.5 %
Smell/fragrance	Odourless
Full curing speed	0.5 mm/d
Fully hardening/curing conditions	23°C and 50% relative humidity
Min. skin-formation time	5 min
Min. breaking elongation	50 %
Breaking elongation conditions	for 2-mm film
Conditions for skin-formation time	at 23°C and 50% relative humidity
Shore A hardness	28
Min./max. temperature resistance	-20 to 75 °C
Min./max. processing temperature	5 to 40 °C
Recoatable/Can be painted over	Yes
Surface pre-treatment required	On absorbent or porous surfaces
Mixing ratio	Mixing ratio of acrylic sealant to water = 1:1 to 1:5
Ultraviolet resistance	Yes
Coating compatibility	Yes
Shelf life from production	18 Month
Conditions to maintain shelf life from production	at 10°C to 25°C

Suitable glove:

Product

Description

Household glove

Description:

Permeation level: 3

Liquid-proof, premium-quality cleaning glove made from natural latex

Vinyl chemical and moisture protective glove

Description:

Permeation level: 6

Fully dipped protective glove with vinyl coating on cotton jersey lining

Nitrile chemical protective glove

Description:

Permeation level: 6

With cotton velour finish inside.

Chemical protective glove chloroprene

Description:

Permeation level: 4

Heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.