Tap wrench DIN 1814 Performance, adjustable
TAPWRNCH-DIN1814-PERFORMANCE-SZ5-(M12-33
Art.-no. 0657800500
EAN 4061975320803
Register now and access more than 125,000 products
Pinpoint accuracy
- Precision-eroded, hardened clamping jaws with built-in guide groove.
- As a result of the eroding process, only minimal radii are created at the internal and external corners.
- The movable jaws are secured to the handle by a split pin.
- Thanks to this innovative type of fastening, a loosening of the thread screw connections is prevented.
Convenient operation
- Handles with a fine cross knurling ensure safe work even under a high degree of contamination.
- When used in confined spaces, a handle can be unscrewed easily.
Safe work even using high forces
- Offers very high load-bearing capacity compared to standard models.
- Black coated handles made of steel and powder-coated tap wrench body make for a high level of resistance.
Datasheets(X)
Adjustable tap wrench for mounting hand tools with a square shank in accordance with DIN 10, such as hand taps, reamers or screw extractors.
When clamping hand taps, please note the following:
- Turn the handle to release the movable jaw.
- Place the square shank of the hand tap in the resulting gap.
- Turn the handle again to secure the hand tap between the clamping jaws.
- When clamped in this way, the tool is suitable for cutting threads by hand.
- First drill a tapping hole into the workpiece.
- Apply suitable cutting fluid and lubricant to the hand tap.
- Place the hand tap perpendicular to the workpiece.
- Use the 2 handles to apply a high level of force when cutting threads.
- When cutting threads manually, it is important to ensure that the drill bit is turned back at regular intervals, in order to break the swarf created.
Size | 5 |
Length | 700 mm |
Material | Die-cast zinc |
DIN | 1814 |
Min./max. thread-cutting area, metric | 12-33 mm |
Suitable for min./max. square socket size | 7-20 mm |
Min./max. thread-cutting area Whitworth pipe thread BSP (G-thread), imperial | 1/4-1 in |
Min./Max. thread-cutting area Whitworth (W-thread), imperial | 1/2-1-1/4 in |
Min./max. reamer cutting range | 9-26 mm |
Last viewed
VDE wire stripping pliers, IEC 60900
3/4" cardan joint
Rust-stop QUATTRO primer
Serrated lock ring, shape VSKD A2 stainless steel, plain, VSKD
Snap-off blade
Metric double open-end wrench DIN 3110/ISO 1085
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
1/2 inch socket wrench insert, metric
Sanding disc Useit Superpad vehicle
WIPE-N-SHINE squeegee