Tap wrench DIN 1814 Performance, adjustable
TAPWRNCH-DIN1814-PERFORMANCE-SZ3-(M5-20)
Art.-no. 0657800300
EAN 4061975320780
Register now and access more than 125,000 products
Pinpoint accuracy
- Precision-eroded, hardened clamping jaws with built-in guide groove.
- As a result of the eroding process, only minimal radii are created at the internal and external corners.
- The movable jaws are secured to the handle by a split pin.
- Thanks to this innovative type of fastening, a loosening of the thread screw connections is prevented.
Convenient operation
- Handles with a fine cross knurling ensure safe work even under a high degree of contamination.
- When used in confined spaces, a handle can be unscrewed easily.
Safe work even using high forces
- Offers very high load-bearing capacity compared to standard models.
- Black coated handles made of steel and powder-coated tap wrench body make for a high level of resistance.
Datasheets(X)
Adjustable tap wrench for mounting hand tools with a square shank in accordance with DIN 10, such as hand taps, reamers or screw extractors.
When clamping hand taps, please note the following:
- Turn the handle to release the movable jaw.
- Place the square shank of the hand tap in the resulting gap.
- Turn the handle again to secure the hand tap between the clamping jaws.
- When clamped in this way, the tool is suitable for cutting threads by hand.
- First drill a tapping hole into the workpiece.
- Apply suitable cutting fluid and lubricant to the hand tap.
- Place the hand tap perpendicular to the workpiece.
- Use the 2 handles to apply a high level of force when cutting threads.
- When cutting threads manually, it is important to ensure that the drill bit is turned back at regular intervals, in order to break the swarf created.
Size | 3 |
Length | 380 mm |
Material | Die-cast zinc |
DIN | 1814 |
Min./max. thread-cutting area, metric | 5-20 mm |
Suitable for min./max. square socket size | 4.9-12 mm |
Min./max. thread-cutting area Whitworth pipe thread BSP (G-thread), imperial | 1/8-1/2 in |
Min./Max. thread-cutting area Whitworth (W-thread), imperial | 7/32-3/4 in |
Min./max. reamer cutting range | 6.5-15 mm |
Last viewed
Hand brush with plastic bristles
Brushes For tyre fitting paste
HHS 100 adhesive lubricant
Crimping tool For insulated connectors
Wood clamp
1/4 inch socket wrench insert, metric short
Nozzle for PEG 312 pneumatic rivet nut tool
1/2 inch impact socket wrench insert hexagon, metric, short
Hexagonal bolt with thread up to head for pressure container construction DIN EN ISO 4017, A4 stainless steel
Comfort connection safety coupling Series 2000