Soft solder paste no. 30 With brush
Soft solder paste no. 30 with brush
SFTSLDRPAST-NO30-BRUSH-250G
Register now and access more than 125,000 products
- Flux DIN EN 29454-1/3.1.1.C
- Solder S-Sn 97 Cu 3 DIN EN ISO 9453 (content 60% by weight)
- Residues are soluble in cold water
The flux residues are corrosive and must be removed from the outside by wiping and from the inside by flushing.
Datasheets(X)
Ready-to-use soft solder paste for pre-tinning and soft soldering in copper pipe installation in conjunction with fitting solder. Suitable for cold and hot water installations with copper pipes according to DVGW/GW 2 and GW 7
Using the brush, apply the soft solder paste to the surfaces cleaned beforehand with cleaning fleece. Bring the solder joint evenly to the working temperature (approx. 300ºC) and then add the fitting solder. The soldering work can be carried out by means of flame or resistance heating.
Weight of content | 250 g |
Colour | Grey |
Material designation | S-Sn97Cu3 |
Shelf life from production | 24 Month |
EN standard | 29454-1 |
DIN | 8511 |
pH value | 7 |
Min. flashing point | 135 °C |
Last viewed
Twist drill bit HSS DIN 338 type RN 130°
Pin punch In accordance with DIN 6450 form C with hardened impact head
Hand tap, taper tap HSS DIN 352
Brake Fluid DOT 4
T-handle socket wrench For hexagon head screws
Valve setting rings assortment 60 pieces
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled
Engine oil 0W-40 API SN
Flat blunt-ended file DIN 7261, shape A
C 6.3 TX bit (1/4 inch)