Swivel joint For pneumatic tools
Pneumatic swivel joint 360°
SWIV-PN-ET-R1/4IN
Register now and access more than 125,000 products
High flexibility right at the pneumatic device makes use much easier
Can be bent to at least 180°
No bending of the connecting hose.
Can be rotated through 360°
Prevents the pneumatic hose from twisting.
A manometer can be connected directly to the swivel joint
Working pressure is measured right at the pneumatic tool.
Each connection leads to pressure losses. For this reason, a pneumatic system should only have as many connections as is really necessary. Insufficient operating pressure leads to performance losses.
Datasheets(X)
Pneumatic connection | 1/4 inch ET x 1/4 inch IT |
Flow capacity | 750 l/min |
Last viewed
Simplex soft face hammer With steel housing
1/2 inch impact socket wrench insert hexagon, metric, short
Hexagon socket set screw with flattened tip ISO 4027, A2 stainless steel, 21H, plain
Lock washer type S A2 stainless steel
Rapid repair tape HR
Car zinc adhesive weight From the original equipment for VW, Opel and Volvo
Contact spray
Thermo tacker WTG 40
Fleece Segmented Grinding Disc For direct use on angle grinders
Threaded pin ISO 4027, steel 45H, zinc-plated, blue passivated (A2K)