Thread die HSS DIN EN 22568 for standard metric ISO threads
Threaded die HSS DIN 13-1
Register now and access more than 125,000 products
- Can be used on both sides
- Threads can be cut in one process
- Easy cutting and excellent chip removal in cutting direction
High edge retention
Catalogue page as PDF 1
The die is placed in the die holder at the height of the middle screw. The screws are tightened with a screwdriver. The die is placed vertically on the workpiece. Can be used on both sides. When cutting, sufficient cutting oil must be added. After two revolutions, the cut can be broken by briefly turning back.
For metric ISO thread DIN 13
Thread type x nominal diameter
Material to be processed
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Plus disposal costs -,-- per selected packing unitCust. Mat. No.
Plastic frame anchor W-FRAH 10 steel zinc plated
Contact spray SW
Vehicle dry abrasive paper strip Arizona® perfect
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
Standard electrician's tool case 31 pieces
Vehicle dry abrasive paper strip RED PERFECT®
Hose clamp with asymmetrical lock
Thin-walled heat-shrink hose Shrink rate 2:1 without internal adhesive
Fuses blade ATO