Plug-in nipple Series 2000
Nipple with male thread, series 2000
NPL-PN-S2000-ET-R1/4IN
Register now and access more than 125,000 products
High flow rate of up to 2100 l/min and maximum operating pressure of 16 bar
Enables optimum compressed air supply and output utilisation of compressed air consumers. Results in greater productivity and lower energy costs.
Air-tight connections
Low energy consumption and a high level of efficiency
Hardened steel nipples
For max. pressure-bearing capacity and long service life.
Exposed surfaces are chrome-plated, nickel-plated or galvanised
High corrosion resistance for protection even under demanding conditions.
Series 2000 fittings comply with the European standard and have a nominal width of 7.6 mm
Euro profiles are compatible with other compressed air fittings.
Material: Steel
Material | Steel |
Connection thread | ET R 1/4 inch |
Length (L) | 39 mm |
Surface | ZN 8 silver |
Width across flats (SW) | 14 mm |
Max. pressure | 16 bar |
Flow capacity | 2100 l/min |
Min./max. temperature resistance | -20 to 100 °C |
Würth Catalogue (1)
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Rust stop primer
3/8-inch socket wrench insert, metric long
PURlogic® Fast 2-component frame foam
Allen key set, hexagon socket 9 pieces
1/4 inch socket wrench insert, metric short
Paint Spray
Fast grinding polish P10 Plus
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
Hexagon nut DIN EN 14399-4, steel 10Z, hot-dip galvanised, for high-strength structural bolting assemblies