Powerbond bodywork adhesive
Bodywork adhesive, Powerbond
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
High-strength epoxy resin adhesive
- Repair restores the original strength and rigidity
- Less spot welding
- Meets the requirements of automotive manufacturers
Glass particle technology
An adhesive layer thickness of 0.7–1.2 mm is guaranteed even after heavy pressing
Glue will not run on vertical surfaces (thixotropic)
Outstanding corrosion protection
- Restores original rusting resistance
- Prevents signs of rust at welding points
Can be planed/painted
Silicone and VOC-free
Not suitable for load-bearing bodywork parts (e.g. A-pillars, longitudinal chassis beams etc.). When replacing parts, do not glue on visible surfaces, as "shadow lines" may appear. The product must be stored in a frost-free location. For cordless or pneumatic guns, the lowest setting/feed should be used to prevent the cartridge from deforming.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Structural adhesive for steel, aluminium, stainless steel and glass fibre-reinforced plastics (GFRP, CFRP). For bonding bodywork parts such as wings, side walls, wheel arches, roof panels and door panels.
The substrate must be capable of bearing loads and must be clean, dry and free from grease and rust. Old adhesive residues must also be removed. Observe the processing instructions. For more information, refer to the technical data sheet.
Min. tensile strength
Min. combined tension and shear resistance
Conditions for combined tension and shear resistance
after four hours, 23°C, EN 1465
Conditions for tensile strength
at 23°C, in accordance with ASTM D-638
Shore D hardness
Conditions for Shore hardness
in accordance with DIN 53505
Conditions for working life
Min./max. temperature resistance
-30 to +120 °C
Min./max. processing temperature
15 to 25 °C
Max. short-term temperature resistance
Max. final strength
Conditions for final strength
Shelf life from production
Acetone cleaner, art. 0893460; Quattro rust stop, art. 08932141; pneumatic axial grinder, art. 07032310; Flexi-Disc, art. 0578705 …; nylon fleece disc, art. 067322 50/75; mini fleece disc, art. 0673205.../207...; locking pliers, art. 071409...
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!