Welcome to Würth India For trade customers only

Paint spray Special, clear lacquer

Clear lacquer, nitro-alkydal quality Special

Art.-no. 0893351920

Prices for customers after login

Paint spray Special, clear lacquer

Art.-no. 0893351920

Prices for customers after login



x1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

High-quality nitro-alkydal quality at a high technical level

High-grade nitro-alkydal quality

  • Quick drying

  • Easy to apply

  • Very good coverage properties

  • Good coverage

Can be coated with all common primers, filler products and paint types

Quick-drying paint resin

Formula does not contain heavy metals

Drying time at 20°C

  • Dust-dry< 10 min.

  • Tack-free < 20 min.

  • Touch dry < 60 min.

Temperature-resistant up to +80°C


Storage temperature +15°C to +25°C and up to 60% rel. humidity. Optimum processing temperature is +20°C. No painting on surfaces coated with synthetic resin lacquers, as this can lead to lifting and rippling of the old paint.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue(X)

Catalogue page as PDF 1


Certificates/ Documents



Application area

Wide range of uses: Commercial vehicles, bodywork, radiators, window construction, steel construction etc. Recommended for repair work and parts painting. Solvent or water-based varnishes and sanded old varnishes are suitable surfaces.


Shake can vigorously for approx. 3 minutes before use. The application surface must be clean, dry and free from grease. Remove rust and old loose paint, sand and prime surface. Spraying distance: 20-25 cm. Maintain a flash-off time of approx. 5 minutes between spraying passes.

Chemical basis



400 ml



Gloss level



Round nozzle

Dust-drying time

10 min



Colour number


Min. flashing point

-4 °C


0.8 g/cm³

Conditions to maintain shelf life from production

at 15°C to 25°C and max. 60% relative humidity

Shelf life from production

36 Month

Suitable glove:

Household glove
Household glove
Permeation level: 1
Liquid-proof, premium-quality cleaning glove made from natural latex
Chemical protective glove, Butyl
Chemical protective glove, Butyl
Permeation level: 2
Gas-tight and resistant to exhaust gases produced by combustion processes
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
≥ 10 min
≥ 30 min
≥ 60 min
≥ 120 min
≥ 240 min
≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Catalogue page as PDF  | 


Datasheets ()

CAD data  | 

Certificates/ Documents



Technical information