PREMIUM SIDE CUTTER REDSTRIPE
Side cutters REDSTRIPE
SDCTR-CRV-L6IN
REDSTRIPE
Register now and access more than 125,000 products
Standard: DIN ISO 5749
Chrome-Vanadium steel
The Chrome-Vanadium alloy (mix of two or more metals) enhances resistance to rusting and provides additional strength and hardness in tough operations
Double-layer pearl nickel plating
Superior corrosion and wear resistance.
Cutting blade hardness 58-62 HRC with 80 degrees angle
Produces satisfyingly smooth, clean cuts with minimal effort
Cross-cut geometry and knife-to-knife aligned cutting edges
Allowing for clean and effortless cuts through both soft and hard materials
Long lifespan
5.000 cuts life cycle
Precision and alignment of the jaws
Allow gripping even paper sheets
2 Component (2K) chemical resistant handle
Cushioned blend of Polypropylene (PP) and Thermoplastic Rubber (TPR).Grippy even with greasy hands
• Avoid cleaning the cable with solvents or chemicals that damage the material.
• Never carry out repairs with electrical tape on cables damage under the risk of accidents.
• Never use pliers with a damaged handle, replace for a new one.
• Tool with NON-insulated cable.
• Never use pliers as hammers in strike actions to avoid creating clearance between parts and misalignment of the jaws.
• Do not use to tighten or loosen nuts or screws, at the risk of damaging them.
• Never use these pliers for network work energized electrical outlets.
Datasheets(X)
Length (L) | 155 mm |
Max. hard wire diameter cutting capacity | 2.0 mm |
Max. medium wire diameter cutting capacity | 2.6 mm |
Max. soft wire diameter cutting capacity | 3.0 mm |
Max. piano wire diameter cutting capacity | 0 mm |
Last viewed
Speed cutting disc For steel
Air cndtnng srvc. unit, vhcls., spr prt
Reinforced rubber hose For one-handed, two-handed grease gun and lever grease gun
2-component hand brush With rust-free wires and 2-component handle
Impact cap
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, yellow chromated (A2C)
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
W-VD-A/S anchor rod for W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete, zinc-plated steel
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
3/4-inch ratchet With 2-component handle