PREMIUM COMBINATION PLIER REDSTRIPE
Combination pliers REDSTRIPE
COMBIPLRS-CRV-L7IN
REDSTRIPE
Register now and access more than 125,000 products
Standard: DIN ISO 5749
Chrome-Vanadium steel
The Chrome-Vanadium alloy (mix of two or more metals) enhances resistance to rusting and provides additional strength and hardness in tough operations
Double-layer pearl nickel plating
Superior corrosion and wear resistance.
Cutting blade hardness 58-62 HRC with 60 degrees angle
Produces satisfyingly smooth, clean cuts with minimal effort
Cross-cut geometry and knife-to-knife aligned cutting edges
Allowing for clean and effortless cuts through both soft and hard materials
Long lifespan
5.000 cuts life cycle
2 Component (2K) chemical resistant handle
Cushioned blend of Polypropylene (PP) and Thermoplastic Rubber (TPR).Grippy even with greasy hands
• Avoid cleaning the cable with solvents or chemicals that damage the material.
• Never carry out repairs with electrical tape on cables damage under the risk of accidents.
• Never use pliers with a damaged handle, replace for a new one.
• Tool with NON-insulated cable.
• Never use pliers as hammers in strike actions to avoid creating clearance between parts and misalignment of the jaws.
• Do not use to tighten or loosen nuts or screws, at the risk of damaging them.
• Never use these pliers for network work energized electrical outlets.
Datasheets(X)
Length (L) | 180 mm |
Max. medium wire diameter cutting capacity | 2.6 mm |
Max. hard wire diameter cutting capacity | 2.2 mm |
Surface | Chrome/ nickel plated |
Material | Chrome-vanadium steel |
Material of handle | 2-component plastic |
ISO | 5746 |
Last viewed
Hexagonal cap nut, low profile DIN 917, A4 stainless steel, plain
W-VI-A anchor rod zinc-plated steel
Twist drill bits HSS DIN 338 type RN TIN head
Pole terminal puller, twin leg, 65 mm span
Engine sealing compound, Silicone Special 250
Abrasive cloth Roll, metal
Standard electrician's tool case 31 pieces
Hand tap set HSS, DIN 352 3 pieces
Power screwdriver bit Hexagon
Screwdriver slotted 3C handle with hexagon shank