Jump starter, 12-V Li-ion, Booster Light
Jump starter 12V Li-Ion Booster Light
JUMPSTRT-(LIIONBOOSTER-LIGHT)-12V
Register now and access more than 125,000 products
Quality in a compact design
- Use of high-quality materials and components.
- Excellent performance due to the high-quality Li-ion battery, sturdy cables and clamps.
- Practical due to Li-ion technology and a sophisticated design.
Intuitive and multifunctional
- Very easy to use: plug in, switch on and go.
- LED display to check the internal battery charge status.
- USB charging option via power socket or cigarette lighter connector.
- Can be used as a power bank due to its USB output
- LED light with seven modes
Safe and reliable
- Protection against reverse polarity, sparks, overload, overvoltage and overheating.
- Compliance with all relevant standards
Includes:
- Li-ion Booster Light
- USB cable
- 230 V USB adapter
- 12 V USB cigarette lighter adapter
- User manual
- Storage bag
The device should only be operated by qualified and authorised personnel. All persons involved in commissioning, servicing and maintaining the device must be appropriately qualified.
The override mode should be used with extreme caution and only in exceptional cases, as the spark and reverse polarity protection are disabled.
Datasheets(X)
Vehicles with diesel/petrol engines and 12 V electrical systems.
1. Turn off the vehicle and remove the ignition key.
2. Connect the jump starter while it is switched off and fully charged.
3. First, connect the red positive terminal to the positive battery terminal; then the black negative terminal to an earth point on the vehicle.
4. Switch on the jump starter and start the vehicle.
5. If necessary, activate the override mode, i.e., if the vehicle battery is almost completely flat or the jump starter's power is insufficient.
5. Switch off the jump starter, then remove the negative terminal first, followed by the positive terminal.
6. Recharge the jump starter.
Suitable for max. cubic capacity | 1.6 l |
Rechargeable battery/battery capacity | 2150 mAh |
Max. current | 1000 A |
Nominal current | 300 A |
Wire cross section | 8.34 mm² |
Width x height x depth | 183 x 43 x 85 mm |
Weight | 700 g |
Type of rechargeable battery/battery | Li-lon |
Rechargeable battery/battery permanently installed | Yes |
Number of rechargeable batteries/batteries | 1 PCS |
Material of housing | Plastic |
Colour | Grey, Black |
Type description | Li-ion Booster Light |
Display | LED |
Last viewed
Welding Outfit Back-Pressure Valve
1/2 inch socket wrenches Assortment of 21 pieces
Hexagon nut with left-hand thread DIN 934, steel I8I, zinc-plated, blue passivated (A2K)
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel 10.9, plain
Round head screw with square neck and nut DIN 603 with nut, steel, strength class 4.8, zinc-plated, blue passivated
Twist drill bit HSS DIN 338 type RN 130°
Tapered pin, unhardened DIN 1, plain steel, unhardened, design A (ground)
Flat washer For hexagon head bolts and nuts
Threaded mandrel with chuck
Twist drill DIN 340 HSS type RN