Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, steel I8I, zinc-plated, yellow chromated (A2C/A3C)
DIN 985 steel I6I / I8I zinc plated yellow
NUT-HEX-DIN985-I6I-WS8-(A2C)-M5
Register now and access more than 125,000 products
- Hexagon nuts with lower nominal height complying with DIN 985 cannot support test loads as per ISO 898-2
- The strength class designation has two vertical bars added before and after the strength code to differentiate.
DIN 985 has been withdrawn and replaced by ISO 10511. There is some limited similarity (thread M7, M18, M22, M27, M33 and threads with nominal diameter > M36 removed | Fine thread removed | Nut height changed | Width across flats changed for threads M10, M12 and M14 to 16, 18 and 21 mm | Strength classes changed to 04 and 05).
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (D) | M5 |
Height (m1) | 5 mm |
External drive (s1) | WS8 |
Standards | DIN 985 |
Material | Steel |
Property class | I6I |
Surface | Zinc plated yellow |
RoHS-compliant | No |
Form | Low |
Locking device operating principle | Clamping part polyamide ring |
Locking function | Locking against loosening by clamping |
Last viewed
Pneumatic air quick-action coupling Blocks in one direction
Polisher pneumatic spare parts
Water pump pliers DIN ISO 8976
Double-end box wrench, deep depressed centre 8 pieces
Air cndtnng srvc. unit, vhcls., spr prt
Cartridge gun Airquick
Impact wrench, pneumatic, spare parts
Superglue Klebfix
Protective cotton Knitted Glove
Circlip DIN 471, AS steel, plain