Clamping mandrel For cutting discs and grinding discs
Clamping mandrel for cutting and grinding disc
MNDRL-CUTDISC-D6-(0-8MM)-SHFT6MM
ZEBRA
Register now and access more than 125,000 products
Clamping range from 0–8 mm
Just one clamping mandrel for all clamping ranges.
Clamping screw is completely countersunk in clamping mandrel
No protruding thread sections, enabling work even in cramped spaces.
Clamping screw with large contact surface and right-hand thread (self-clamping effect)
Reliable holding of wheels.
Clamping screw with large support surface and lengthwise slit
Easy to loosen or tighten with a 17 mm open-ended spanner or slotted screwdriver.
Datasheets(X)
Suitable for bore diameter | 6 mm |
Length | 54 mm |
Shank diameter | 6 mm |
Last viewed
1-inch impact socket wrench insert hexagon, metric, short
Retaining spring For pneumatic chipping hammers
Paint retouching pen
Countersunk head screw with recessed head, H DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
Flat washer For hexagon head bolts and nuts DIN 125, A2 stainless steel
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Amo® III 7.5 type 3 window frame screw Half round head
Cheese head screw With hexagon socket
1/4 inch cardan joint with a braked joint to fix the specified position
3/8 inch socket wrench insert metric, hexagon, short