Clamping mandrel For cutting discs and grinding discs
Clamping mandrel for cutting and grinding disc
MNDRL-CUTDISC-D6-(0-8MM)-SHFT6MM
Art.-no. 0664976
EAN 4047376510951
Register now and access more than 125,000 products
Clamping range from 0–8 mm
Just one clamping mandrel for all clamping ranges.
Clamping screw is completely countersunk in clamping mandrel
No protruding thread sections, enabling work even in cramped spaces.
Clamping screw with large contact surface and right-hand thread (self-clamping effect)
Reliable holding of wheels.
Clamping screw with large support surface and lengthwise slit
Easy to loosen or tighten with a 17 mm open-ended spanner or slotted screwdriver.
Datasheets(X)
Suitable for bore diameter | 6 mm |
Length | 54 mm |
Shank diameter | 6 mm |
Last viewed
Screw with flattened half round head and hexagon socket ISO 7380-1 steel 010.9, zinc-plated blue passivated (A2K)
Special steel cutting wire
Nozzle for PEG 312 pneumatic rivet nut tool
Assortment of specially fused alumina sanding tips, pink 10 pieces
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Hand Sanding Blocks with Extraction
Pneumatic chipping hammer DMH 10
Pneumatic impact screwdriver DSS 1/2 inch H
Clamping pins (sleeves) assortment 240 pieces in system case 4.4.1. ISO 8752
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)