Heavy-duty castor with fixed holder
Heavy-duty fixed castor
HDUTFIXCSTR-SCRONPLT-D125-550KG
Register now and access more than 125,000 products
- Ball bearing hub
- Strength: 95±3 Shore A
- High load-bearing capacity
- Temperature resistance from -20°C to +80°C
- Excellent sliding properties and elasticity
- Good resistance to wear and tear
- Heavy-duty, electrolytically galvanised sheet steel housing
- Double ball collar with grease lubrication
- Dust protection ring
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
Suitable for environments exposed to the weather, alcohols and glycols. Not recommended for use in environments with organic and mineral acids and base alkalis.
This castor is used wherever there is a need for enormous load-bearing capacity: Heavy-duty lifting systems, elevating platforms, steering and transport chassis, mobile platforms etc.
 | |
Roll diameter (D) | 125 mm |
Roll width (L) | 50 mm |
Load capacity | 550 kg |
Height (H) | 170 mm |
Length (A) | 140 mm |
Width (B) | 110 mm |
Hole distance (a) | 105 mm |
Hole distance 2 (b) | 80 mm |
Elongated hole diameter (c) | 11 mm |
Min. temperature conditions | -20 °C |
Max. temperature conditions | 80 °C |
Last viewed
Allen key, hexagon socket
Impact wrench, pneumatic, spare parts
Wire cup brush Braided steel with M14 connecting thread
3/8 inch socket wrench insert metric, hexagon, short
Machinist's hammer German design in accordance with DIN 1041
Combination wrench assortment 17 pcs
Male thread plug-in nipple
Twist drill bit assortment HSS DIN 338 type RN 118°. 155 pieces in system case
Gear Oil 80W90 GL4
TIME-SERT® threaded bushing