HSS centre drill bit
Centre drill bit HSS DIN 333 shape A
DRL-CENT-MET-DIN333-A-D3,15MM
Register now and access more than 125,000 products
Shape A, right-hand cutting
- Without protection countersink
- With straight running surfaces
- Countersink angle 60°
- Ø tolerance on the shank: h9 in accordance with DIN 7160
Datasheets(X)
 | |
Standards | DIN 333 |
Form | A |
Countersink angle | 60 Degree |
Cutting material | HSS |
Diameter (d1) | 3.15 mm |
Length (l1) | 50 mm |
Shank diameter (d2) | 8.0 mm |
Last viewed
Threaded pin ISO 4027, steel, 45H, plain
3/8 inch cardan joint
Hexagonal bolt, with thread to head and fine thread DIN 961, steel 8.8, zinc-plated, blue passivated (A2K)
Gravel throw and underbody protection
Metric double box-end wrench with POWERDRIV®
Packing tape dispenser
Butyl tape
Heat-shrink solder connector
Metric ratchet combination wrench Flexible ratchet head with POWERDRIV®
1/2-inch socket wrench insert, TX head For external TX screws, short