Flashing warning lamp LED round
LED flashing warning lamp, round
LGHT-HAZARDFLASH-BTRY-108X111MM
Art.-no. 0827559000
EAN 4050641674449
Register now and access more than 125,000 products
9 different operating modes
- Rotating, fast flashing, single flashing, alternating flashing, SOS signal, bright continuous light, soft continuous light, 2 LED flashing light, 4 LED flashing light, off
- To switch off the lamp without switching through all 9 menu items: Press and hold the on/off button for 2 seconds. 2 LEDs flash 5 times and the lamp switches off. When the lamp is switched on again, it remembers the last mode used.
Using the magnet on the back: The LED warning lamp can be attached to metal surfaces.
To charge the LED warning lamp, place it on the magnetic mount (observe correct polarity).
The LED warning lamp is not approved for ECE R65.
Do not make any alterations to the device. If the warning lamp is incorrectly assembled, this can affect its watertightness and damage the device.
Datasheets(X)
Depending on the application, it can be used horizontally, upright or suspended, e.g. on roads, at construction sites or in other areas where emergency signals need to be displayed.
Power rating | 2.6 W |
Battery designation | Li-Ion |
Number of rechargeable batteries/batteries | 1 PCS |
Length x width x height | 105 x 35 x 35 mm |
Last viewed
Pneumatic blind rivet gun PNG 122
Try square accuracy 2
Hexagon bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, zinc-plated, blue passivated (A2K)
Wire feeder
Engine Flush & Cleaner
Pneumatic blind rivet gun PNG 102
1/2 inch extension
Sandpaper, waterproof
T-handle wrench, hexagon socket with side tip