FILL & CLEAN static mixer
Static mixer Fill & Clean
MIX-DWL-PLA-WIT
Register now and access more than 125,000 products
For mixing together the two "WIT cartridge components"
Side mixer contour can be used to clean the cartridge. The cartridge can then be resealed with the cartridge cap.
Suitable for chemical injection mortar:
- CONCRETE SPECIALIST WIT-VM 100
- WIT-EXPRESS
- ALLROUNDER WIT-VM 250
- NATURAL STONE SPECIALIST WIT-EA 150
- BASIC WIT-PM 200
- WIT-NORDIC
Suitable for mortar cartridge:
- Coaxial (1:10): 150 ml, 330 ml, 420 ml
- Tubular film (1:10): 300 ml
Suitable mixer extensions:
- WIT-MV mixer nozzle extension, rigid, 10 x 200 mm
- WIT-MV mixer nozzle extension, rigid, 10 x 2000 mm
- WIT-MV mixer nozzle extension, flexible, 10 x 2000 mm
Datasheets(X)
Length | 21.5 cm |
Diameter | 8 mm |
Colour | Red |
Suitable for injection mortar | WIT-EA 150, WIT-Express, WIT-Nordic, WIT-PM 200, WIT-VM 100, WIT-VM 250 |
Suitable for cartridges type | Koaxial (1:10) + 150 ml, Koaxial (1:10) + 330 ml, Koaxial (1:10) + 380 ml, Koaxial (1:10) + 420 ml, Schlauchfolie (1:10) + 300 ml |
Last viewed
T-handle, TX with side tip
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, zinc-plated, blue passivated (A2K)
Double open-end wrench assortment 8 pieces
Rust stop primer
Alkaline manganese button cell 1.5 V
Bond + Seal structural adhesive
Ratchet combination wrench
Washer with large outside diameter DIN 9021 (with large outside diameter), steel, zinc-plated, blue passivated (A2K)
3/8-inch socket wrench insert, metric long
3/8 inch socket wrench insert metric, hexagon, short