ECOFAST® chipboard screw
ECOFAST steel zinc plated PT cs milling head Z
SCR-CS-CTRHD-WO-Z2-(A2K)-4X55/34
ECOFAST
Register now and access more than 125,000 products
Milling head
- Automatic countersinking in all coated and uncoated particle board sheets, medium-density fibreboard sheets (MDF) and all other wood and wooden materials
- Won't crack coating
- No cracking or splitting of material when screwing at edges
Thin shaft
The thin shaft enables a direct connection without gaps.
Thread and 25° tip
- Simple screwing in owing to sharp thread with anti-friction coating
- Pin-point placement on hard surfaces such as coated and waterproof chipboard and all wood types, wooden materials and medium-density fibreboard (MDF).
Not for outdoor use.
 | |
Nominal diameter (d) | 4 mm |
Length (l) | 55 mm |
Thread length (lg) | 33 mm |
Head type | Countersunk milling head |
Head diameter (dh) | 8.0 mm |
Internal drive | Z2 |
Material | Steel |
Surface | Zinc plated |
Würth Catalogue (1)
Datasheets (1)
CAD data (available after login)
Certificates/ Documents (0)
Last viewed
Blance weight for car steel rims Steel knock-on
Dust Extraction System
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), shape C, with tip
Fleece Segmented Grinding Disc For direct use on angle grinders
Snap hook DIN 5299, shape C, zinc-plated steel
Wet & Dry Tool Dust Extraction System & Vacuum Cleaner
Replacement nozzle set For AP HVLP all-round paint spray gun
PURlogic® Fast 2-component frame foam
Flat chisel In line with DIN 6453