Door frame clamp
Door jamb clamp
DRJMBCLMP-TU-(SPNW545-1010)
Register now and access more than 125,000 products
- Eliminates the need for laborious alignment using inserts, wedges or spreaders
- Eliminates distortion even if the internal pressure of the foam is uneven
Datasheets(X)
Two clamps are used per door - one at the level of the lock and the second at the level of the lower hinge. Thanks to the flat clamping plates, the door frame clamp can also be fixed in grooves in the casing. The butterfly screws on the sides can be used to support and align the clamp against the wall. The printed scale simplifies adjusting the clamp to the size of the door casing. Door clamps can be attached to the casing in the workshop. This enables the door casing to be transported safely to the building site.
Min./max. clamping width | 545-1010 mm |
Product weight (per item) | 1420 g |
Last viewed
Hexagonal bolt with threading up to the head DIN 933, steel 10.9, plain
Twist drill bit HSS DIN 338 type RN 118°
Female thread plug-in nipple
Hexagon socket set screw with truncated cone ISO 4026 A2 stainless steel 21H, plain
Elbow pipe wrench Swedish form, angled 90°
1/2 inch cardan joint With a braked joint to fix the specified position
Metric double box-end wrench with POWERDRIV®
Combination wrench, inch with POWERDRIV®
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, yellow chromated (A2C)
Screwdriver assortment 2, 21 pieces