Dent Puller Digital
Dent repair spotter Spot W3465
DNTSPTR-SPOT(TRAFO)-PINPLLER
Art.-no. 0691500166
EAN 4056807922638
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
Rapid Dent Removal from outside of the vehicle body.
- Allows welding on of Triangle Washers, Round Washers, Long Washers, Zig Zag Wire.
- Carbon Electodes (Rods) can be used with the machine to shrink the metal.
- Extra long cable enable long reach
- Short welding time max.1 sec.
- Fixed Power setting for Carbon Mode.
- Variable Power and time setting for Dent Mode.
- Body Straightner (Optional)
These instructions are only recommendations, which are based on our experience, preliminary testing advised before use.
Product information
Datasheets(X)
Application areaOn Dent of Car and Two Wheeler Steel Sheet Metal Body.
Instructions
- Remove the Paint on the dent surface till bare metal.
- Weld the appropriate electrode using the Gun.
- Pull the dent using the sliding hammer or Body Straightener (Optinal).
- Use the Carbon electrode along with the adapter to shrink the repaired area.
Nominal voltage | 230 V/AC |
Frequency | 50 Hz |
Power rating | 2.3 kVA |
Conditions for power rating | at 100% action time |
Power (welding) | 1.6 kVA |
Main fuse | 16 A slow |
IP protection class | IP 21 |
Secondary-current short circuit | 1800 A/AC |
Max. current | 1800 A |
Length | 330 mm |
Width | 210 mm |
Height | 300 mm |
Cable cross section | 2.5 mm² |
Number of phases | 1 PCS |
Secondary voltage | 8 V/AC |
Control current connection socket | Renk, XLR |
Connecting socket diameter | 13 mm |
Open circuit voltage | 8 V |
Weight of add-on | 0.7 kg |
Weight of supporting underlay | 7.5 kg |
RoHS-compliant | No |
Product weight (per item) | 19 kg |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!