Cooling system tester
Cooling system tester
CLSYSTEST-F.CAR/TR
Register now and access more than 125,000 products
Datasheets(X)
1. Adapter rubber and opening to be sealed must be free of oil, grease and glycol residues
2. Press the adapter into the radiator opening or expansion tank and seal by rotating the two adjustment wheels against one another
3. Connect radiator tester
4. Pump approx. 1.3 bar into the cooling system using the hand pump
5. The pressure in the cooling circuit must not drop by more than 0.2 bar within 10 minutes.
6. In the event of a drop in pressure, localise and eliminate potential points of leakage (e.g. water pump, hoses, cylinder head seal)
Caution: The universal adapter should never be immersed in cooling fluid as this causes fluid leakage at the valve when the pressure is released.
null | null |
Last viewed
W-VI-A anchor rod zinc-plated steel
1/4-inch socket wrench insert For TX screws
Electrical brake bleeder
Small abrasives mini fibre disc
High-pressure cleaner HDR 160 premium
Power spray glue plus
Knife blade, offset with adjustable stop roller
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
3/4-inch connector
Socket wrench, hexagon, 3/4 inch Assortment of 15 pieces