Cable sheath slitter
Cable sheath cutters
CBLSHTHCTR-219GR
Register now and access more than 125,000 products
- Cutting depth can be adjusted from 0–5 mm
- Replaceable blade (can be used on both sides)
- Suitable for longitudinal and circular cuts
- Supplied in plastic case
Not suitable for working on or in the vicinity of live parts.
Datasheets(X)
Slitting depth can be adjusted (0–5 mm) to suit the respective outer jacket using the adjustment screw. At the beginning of each longitudinal or circular cut, the blade is guided by lightly pressing with the finger. The outer insulation is slit using slight leverage movements and at the same time pressing the serrations onto the insulation. The blade can be rotated between longitudinal and circular cutting at any time. The tip of the blade must be gently pressed into the insulation when stripping middle sections.
Length | 154 mm |
Last viewed
W-VD-A/S anchor rod for W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete, zinc-plated steel
W-VI-A anchor rod zinc-plated steel
Vehicle sandpaper strip, ICE perfect
Superglue Klebfix
Metric double-end flare-nut wrench Bi-hex with POWERDRIV®
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled
Goniometer For rotating angle-controlled screw tightening
Metric ratchet combination wrench with ratchet function on both the box and open ends
O-ring For vehicle air-conditioning systems
Welding device spare part