CUT+COOL drilling and cutting oil
Drilling/cutting oil CUT+COOL
Register now and access more than 125,000 products
Cools even while spraying
- Protects tools
- Prevents welding of small material particles on the cutting edge
Good creep properties, penetrates even the smallest tolerances
Excellent corrosion protection
- Provides lasting protection against further rust and corrosion
- No post-treatment or preservation required
Free of silicone, chlorine, resins, and acids
Free from substances that impair wetting of paint.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Catalogue page as PDF 1
Multi-purpose cutting oil for light to medium machining.
Spray the workpiece from about 20–30 cm.
The product is used as supplied.
Shelf life from production
Min. flashing point
Kinematic oil basis viscosity
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Plus disposal costs -,-- per selected packing unitCust. Mat. No.
Stripping knife AM 280
Electrical insulating tape
Lacquer coating system
Protective underlay for hook-and-loop backing pad
U-shaped cutting knife
Ear plugs Soft
Snipe nose pliers DIN ISO 5745
Vehicle dry abrasive paper disc RED PERFECT®
Assortment of specially fused alumina sanding tips, pink 10 pieces
Oil filter wrench, spare belt