CUT+COOL drilling and cutting oil - CUTOIL-DRILL-(CUT-COOL)-400ML

CUT+COOL drilling and cutting oil

Name: CUT+COOL drilling and cutting oil
Brand: Würth
SKU: 0893050004

Drilling/cutting oil CUT+COOL
CUTOIL-DRILL-(CUT-COOL)-400ML

Art.-no. 0893050004

EAN 4056807242910

All versions

Similar products

Prices for customers after login

CUT+COOL drilling and cutting oil

Art.-no. 0893050004

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: 1800 102 5061

Multi cutting oil for light to medium machining work

Universal application

Cools even while spraying

Protects tools

Prevents welding of small material particles on the cutting edge

Good creep properties, penetrates even the smallest tolerances

Excellent corrosion protection

Provides lasting protection against further rust and corrosion

No post-treatment or preservation required

Free of silicone, chlorine, resins, and acids

Notice

Free from substances that impair wetting of paint.

Application area

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Multi-purpose cutting oil for light to medium machining.

Instructions

Spray the workpiece from about 20–30 cm.

The product is used as supplied.

Contents	400 ml
Container	Aerosol can
Colour	Light brown, Reddish
Smell/fragrance	Perfumed
Chemical basis	Mineral oil
Shelf life from production	18 Month
Density	0.889 g/cm³
Acid-free	Yes
Chlorine-free	Yes
Min. flashing point	190 °C
Silicone-free	Yes
Resin-free	Yes
Kinematic oil basis viscosity	12 mm²/s

	Drilling and cutting oil	Drilling and cutting oil Perfect	Drilling and cutting paste Perfect	Drilling and cutting oil Eco	Drilling and cutting foam	Cutting oil DVGW	Cooling lubricant Ultra	Cooling lubricant Ultra HD
Materials
Steel, alloyed steel	xx	xxx	xxx	xxx	xxx	xx	xx	xxx
High-alloy steel	xx	xxx	xxx	xxx	xxx	xx	xx	xxx
Cast iron, grey cast iron	xx	xxx	xxx	xx	xxx	x	xx	xxx
Tungsten carbide	xx	xxx	xxx	xx	xxx	x	x	xx
Non-ferrous base metal (copper, brass etc.)	xx	xxx	xx	xxx	xxx	x	x	xx
Titanium	x	xxx	xxx	xx	xxx	x	x	xx
Magnesium	x	xxx	xxx	xx	xxx	x	x	xx
Aluminium, aluminium alloys	x	xxx	xxx	xx	xxx	x	xx	xxx
Machining processes
Lathing, automatic lathes	xx	xxx	x	x	x	x	xx	xxx
Drilling, countersinking, reaming	xx	xxx	xxx	xxx	xxx	x	xx	xx
Deep drilling	x	xxx	xxx	xx	xx	x	x	xx
Sawing	xx	xxx	xx	xxx	xxx	x	xx	xx
Thread cutting	xx	xxx	xxx	xxx	xxx	xx	xx	xx
Thread forming, rolling	xx	xxx	xxx	xxx	xxx	x	x	xx
Milling	x	xxx	x	xx	xx	x		xxx
Sanding	x	xxx	x	x	x	x	xxx	xx
Forming, rolling, bending	x	xxx	xx	xx	xx	x	x	xx
Punching, fine punching	x	xx	xx	xx		x	x	x
Broaching, toothing	x	xxx	xx	xxx	xxx	x	x	x
Features
Basis	Mineral oil	Mineral oil with synth. ester	Mineral oil with synth. ester	Synth. ester	Glycol and ester	Ester	Mineral oil	Mineral oil
Viscosity (mm²/s)	12	25	Paste-like	35	n/a	5	66	76
Minimum quantity lubrication		⎷		⎷
Free from mandatory warning symbols			⎷	⎷			⎷	⎷
Can be used overhead			⎷		⎷
DVGW-approved						⎷
Biodegradable/approved for use with food				⎷
Extremely high lubricating performance		⎷	⎷	⎷	⎷			⎷
Extremely long tool life		⎷	⎷	⎷	⎷		⎷	⎷
Minimal smoking		⎷	⎷	⎷	⎷		⎷	⎷
Extremely low consumption			⎷	⎷	⎷			⎷
Good creeping properties	⎷
Free of boric acid			⎷		⎷		⎷	⎷
Low-foaming							⎷	⎷
Extremely high microbial stability							⎷	⎷
Water hazard class	1	1	1	1	2	1	1	1
Formaldehyde-free			⎷		⎷		⎷	⎷
Extremely gentle on the skin (amine-free)			⎷				⎷	⎷
xxx excellent suitability xx good suitability x less favourable suitability ⎷ applicable

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.