Brush belt, fine
Fine brush belt
BRSHBL-FN-PGP-DBS3500-L23MM
Register now and access more than 125,000 products
Not for Al or die-cast aluminium. No sand blast effect.
Safety instructions for use with DBS 3500 pneumatic device:
- 11 mm belts may only be operated at a maximum of 5.2 bar
- 23 mm belts may only be operated at a maximum of 6.2 bar
- In both cases, contact pressure may be up to a maximum of 500 gr
Datasheets(X)
The narrow brush belt is specifically designed for the removal of paint from contours and sharp-edged areas with an angle of 90°.
Width | 23 mm |
Last viewed
Fixing clamp
Circlip pliers, shape A for shaft circlips
Hardener thinner
VDE 3/8 inch extension
1/4-inch socket wrench insert, TX head For external TX screws
Wire end ferrule with plastic sleeve according to DIN 46228 Part 4
Precision screwdriver, flat slotted
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
Pneumatic air push-in tip
Stripping knife AM 281