Blind rivet, open, with break mandrel and countersunk head ISO 15978, countersunk head, aluminium/steel
ISO 15978 aluminium/steel zinc ptd. counters. head
RIV-ISO15978-L-ALU/ST-(15,0-20,0)-5,0X25
Register now and access more than 125,000 products
Sleeve: Plain aluminium; pin: Zinc-plated steel, blue passivated
The dimensions and tolerances defined in EN ISO 15978 must be observed.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 5 mm |
Length (l1) | 25 mm |
Head diameter (dk) | 10.5 mm |
Head height (k1) | 2.1 mm |
Material of sleeve | Aluminium |
Material of mandrel | Steel |
Surface of the sleeve | Plain |
Surface of the mandrel | Zinc plated |
Min./max. grip range | 15.0-20.0 mm |
Drill hole diameter | 5.1 mm |
Shear-fracture load | 1400 N |
Tensile fracture load | 2000 N |
Nominal diameter x length (Ø d x l) | 5 x 25 mm |
Head type | Countersunk head 120 degree |
Head angle | 120 Degree |
Last viewed
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel 10.9, zinc-plated, blue passivated (A2K)
Flat connector contact Micro Timer (MT II+III) 1.6
Spray bottle
Diesel Add Treatment
Quick-action coupling Male thread
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Nozzle For cordless blind rivet gun
Winter diesel performance improver
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, zinc-plated blue passivated (A2K)
Wire end ferrule with plastic sleeve according to DIN 46228 Part 4