FILL & CLEAN static mixer
Static mixer Fill & Clean
MIX-DWL-PLA-WIT
Register now and access more than 125,000 products
For mixing the two "WIT cartridge components"
Side mixer contour can be used to clean the cartridge. The cartridge can then be resealed with the cartridge cap.
Suitable for injectable mortar
- CONCRETE SPECIALIST WIT-VIZ
- WIT-VIZ EXPRESS
- ALLROUNDER WIT-VM 250
- NATURAL STONE SPECIALIST WIT-EA 150
- BASIC WIT-PM 200
- RELAST
- WIT-NORDIC
Suitable for mortar cartridge
- Coaxial (1:10): 150 ml, 330 ml, 420 ml
- Foil in tube (1:10): 300 ml
Suitable mixer extensions
- WIT-MV mixing nozzle extension, rigid, 10 x 200 mm
- WIT-MV mixing nozzle extension, rigid, 10 x 2,000 mm
- WIT-MV mixing nozzle extension, flexible, 10 x 2,000 mm
Datasheets(X)
Length | 21.5 cm |
Diameter | 8 mm |
Colour | Red |
Suitable for injection mortar | WIT-EA 150, WIT-VIZ EXPRESS, WIT-Nordic, WIT-PM 200, WIT-VIZ, WIT-VM 250, WIT-BS, RELAST |
Suitable for cartridges type | Koaxial (1:10) + 150 ml, Koaxial (1:10) + 330 ml, Koaxial (1:10) + 380 ml, Koaxial (1:10) + 420 ml, Schlauchfolie (1:10) + 300 ml, Peeler (1:10) + 280 ml |
Last viewed
Cylindrical pin with female thread, hardened ISO 8735, steel, plain, type A, hardened (with chamfer and taper), tolerance m6
Cylindrical pin with female thread DIN 7979, steel plain, hardened, tolerance class m6
Cylindrical pin with female thread DIN 7979, steel plain, hardened, tolerance class m6
Cylindrical pin, hardened DIN 6325, steel, plain
Cylindrical pin ISO 2338 A1 stainless steel (h8)
Natural stone facade anchor, stainless steel 304
Flat washer without chamfer ISO 7089 A4 stainless steel, 200 HV, plain
Hexagon bolt with shank ISO 4014, steel 10.9, zinc-plated, blue passivated (A2K)
Hexagonal bolt with threading up to head ISO 4017, plain A4-80 stainless steel
Hexagonal bolt with shank ISO 4014, plain A2-50 and A2-70 stainless steel