Leak detector Plus

Name: Leak detector Plus
Brand: Würth
SKU: 089027

Leak detector Plus
LKDETR-PLUS-AEROSOLCAN-400ML

Art.-no. 089027

EAN 4053479223599

All versions

Similar products

Prices for customers after login

Leak detector Plus

Art.-no. 089027

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: 1800 102 5061

Leak-detection foam for identifying non-tight areas, micro-leaks and hairline cracks safely and quickly

Easy and quick to apply

Reliable diagnosis within a short period of time

The smallest leaks and those leaks that only occur under high stresses are easy to find

Non-flammable - also possible to detect leaks in flammable gases

Temperature application range (-15 °C to +50 °C), tested in accordance with DIN51421

Can be used in cold ambient temperatures

Suitable for cryogenic gases

pH-neutral

Metals are not attacked

No stress corrosion cracking on plastics such as PVC or PE

Non-corrosive

Not harmful to health

Compatible with oxygen

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting with deliberate intent. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Suitable for all technical and medical gases in compressed-air equipment, compressed-gas equipment, air-conditioning units, compressors, welding devices, air brake systems, tyres, hoses and transport tanks. For pressurised gases such as nitrogen, propane, butane, city gas, acetylene, carbon dioxide, argon, air etc.

Instructions

Spray pressure parts from a distance of approx. 40 cm. Any leak is shown by foam bubbles forming. If micro-leaks are suspected, observe the sprayed area for a while. Then rinse the parts with water.

Contents	0.4 l
Colour	Clear
Smell/fragrance	Mild
Chemical basis	Water tenside
Shelf life from production	24 Month
Min. temperature conditions	-15 °C
Max. temperature conditions	50 °C
Surface tension	22 mN/m
Density	1.03 g/cm³
Density/conditions	1.03 g/cm³ / at 20°C
pH value	7
Min. flashing point	-25 °C
Silicone-free	Yes
AOX-free	No

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 5

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.