Filler VAKU 50 - FILR-PLA-(VAKU-50)-1000G

Filler VAKU 50

Name: Filler VAKU 50
Brand: Würth
SKU: 089260501

Filler, VAKU 50
FILR-PLA-(VAKU-50)-1000G

Art.-no. 089260501

EAN 4053479900025

All versions

Similar products

Prices for customers after login

Filler VAKU 50

Art.-no. 089260501

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: 1800 102 5061

Elastic contour filler, specifically for use on paintable plastic parts

High degree of elasticity

Ideal for modelling and touching up contours

Excellent adhesion

Short drying time

Saves time as further processing can continue directly

Easy to sand

User friendly

Can also be used on other material substrates

Multifunctional

Maximum permissible VOC content of VAKU 50: 250 g/l of product category 2(b). Max. VOC content in accordance with German Ordinance on Solvent-Based Paints and Lacquers (ChemVOC FarbV): 3 g/l.

Heat-resistant up to 80°C

Notice

Tip: Preliminary tests are recommended due to the broad range of mixed plastics! Pre-treatment with a 1-component plastic primer is advisable to ensure optimum adhesion. Not suitable for repairing breakage points. To prevent possible complaints, always ensure that the correct dosing ratio of filler to hardener is used.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Auto/cargo: In vehicle manufacturing and for repairing vehicles. Elastic filler for repairing scratches, recesses and contours (e.g. contact damage on bumpers) on paintable plastic parts.

Metal: Elastic filler for repairing scratches, recesses and contours on paintable plastic parts.

Instructions

The substrate must be clean, dry and free from grease. Sand surfaces. Wherever possible, only sand polyester material when dry due to its sensitivity to water.

Contents	590 ml
Smell/fragrance	Characteristic
Weight of content	970 g
Conditions for VOC concentration	ChemVOCFarb
Chemical basis	Polyester resin
Colour	Anthracite
Hardener content	2 %
Density	1.858 g/cm³
Max. working life	5 min
Min. working life	4 min
Conditions for working life	at 20°C
Conditions for drying time	at 20°C
Min. drying time	20 min
Max. drying time	30 min
Max. temperature resistance of the hardened material	80 °C
Max. permissible VOC concentration	250 g/l
Max. VOC concentration	3 g/l
Shelf life from production	12 Month
Included in delivery	970 g + 30 g hardener and plastic spatula

Filler VAKU 50 including:

1 x

Vaku hardener (peroxide hardener)

HARD-FILR-VAKU-TUBE-40G

Description: Putty hardener for our polyester putty VAKU 20–VAKU 80

Quantity: 1 x

Packaging unit

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

Structure of our article number

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Information on price display

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

Quantity

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Additive article:

Product

Description

Quantity

Price
/PU

Vehicle Nylon Sanding Fleece

SNDFLC-ROLL-KFZ-10M-S1200-115MM

Art.-no. 0585804600

Highly flexible nylon hand sanding fleece for cleaning surfaces (rust removal) and matting new parts, old paint and aluminium. For optimum use in critical areas like folds, corners, recesses or other sharp corners and edges and on interior body parts.

x 1 pcs

Japanese spatula, spring steel

JAPSPTLA-4091-W100MM

Art.-no. 0695940911

For applying and smoothing filler and plaster over smaller areas.

x 1 pcs

Japanese spatula, spring steel

JAPSPTLA-4091-W120MM

Art.-no. 0695940912

For applying and smoothing filler and plaster over smaller areas.

x 1 pcs

Japanese spatula, spring steel

JAPSPTLA-4091-W50MM

Art.-no. 0695940915

For applying and smoothing filler and plaster over smaller areas.

x 1 pcs

Japanese spatula, spring steel

JAPSPTLA-4091-W80MM

Art.-no. 0695940918

For applying and smoothing filler and plaster over smaller areas.

x 1 pcs

Japanese spatula set, spring steel 20 pieces

SPTLA-SET-20PCS

Art.-no. 0695940920

With five of each size: 50 mm, 80 mm, 100 mm and 120 mm

x 1 pcs

Silicone remover

SILREM-AEROSOLCAN-600ML

Art.-no. 0893222600

For professional cleaning and degreasing before applying adhesives or painting

x 1 pcs

Tex-Rein cleaning cloth

CLNCLTH-(TEX-REIN)-27X38CM-150PCS

Art.-no. 0899810

Extra fine cleaning cloth for dust and lint-sensitive areas

Packaging unit

Structure of our article number

Information on price display

Quantity

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

Suitable glove:

Product

Description

Chemical protective glove, Butyl

Description:

Permeation level: 3

Gas-tight and resistant to exhaust gases produced by combustion processes

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.