Do you want to be an online customer?

Register now in three simple steps to use all functions of the Online-Shop.

Sales to trade customers only

Customer login
Do you want to be an online customer?

Register now in three simple steps to use all functions of the Online-Shop.

Sales to trade customers only

Throttle valve cleaner

Air intake and throttle valve cleaner
CARBCLNR-500ML

Art.-no.: 0893105525

Prices for customers after login

Throttle valve cleaner

Art.-no.: 0893105525

Prices for customers after login

Quantity

PU

x 1

Exclusively for trade customers

Register now and access more than 125,000 products

Special, highly active system cleaner for 2- and 4-stroke engines.

Cleaning without removal



Overhead valve


Hard-to-reach areas can be easily accessed



Outstanding cleaning performance


  • Optimum carburettor performance

  • Perfect throttle valve function


Engine runs smoothly


Faults caused by dirty throttle valves or carburettors are rectified.

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Wuerth Catalogue(X)

Catalogue page as PDF 1  |  2  |  3  |  4

Datasheets(X)

Certificates/Documents(X)

Application area

Removes deposits and impurities in the intake and throttle valve area. Calibrated drill holes and nozzles can also be cleaned with this process. Suitable for catalytic converters.

Instructions

When the engine is turned off, generously spray all parts to be cleaned and allow the active agent to react for 2–3 minutes. Then, with the engine running for approx. 30 seconds, spray into the intake and throttle valve area, while slightly increasing the speed to loosen the deposits.

Contents

500 ml

Smell/fragrance

Characteristic

Chemical basis

Mix of organic solvents

Shelf life from production

12 Month

Density

0.8 g/cm³

Last viewed